Uwe Hermann | A slightly paranoid Debian developer

Nice coreboot news — the Free Software x86 firmware ("BIOS") is featured on the cover of issue 186 of the Linux Journal.

Anton Borisov's article Coreboot at Your Service! explains the basic ideas behind coreboot, how to build an image for your board, which payloads are available and how they are used, e.g. GRUB2, SeaBIOS if you need legacy BIOS callbacks (e.g. for booting Windows), Etherboot/GPXE, or more fun stuff such as space invaders or tint (a tetris clone) in your flash ROM chip...

If you read the article and think the build process is a bit complicated and ugly, do not despair! We're currently in the process of converting the whole coreboot code base to use kconfig (the widely-known configuration tool used by the Linux kernel, busybox, and other projects), so in the very near future the whole process for building a coreboot image will work like this:

  $ make menuconfig
  $ make

Flashing the image can then be done using an EEPROM programmer and/or via the user-space utility flashrom (available for Linux, Mac OS X, FreeBSD, etc.)...

It's nice to see that coreboot is getting more and more coverage in "mainstream" media and is growing both in number of deployments and in number of supported chipsets and boards.

We are desperately in need of more developers though, there are just way too many chipsets, boards, and datasheets out there; we're happy about every patch and every new tester or developer who likes to mess with code that runs in the very first few (micro)seconds after power-on.

If you think kernel hacking and related low-level development is nice, you might also be interested in writing code where there's no RAM yet (as coreboot has to initialize it), there's no serial port for debugging (coreboot has to initialize it), no PCI devices have been set up, most of your auxiliary hardware is not yet up (ethernet NIC, parallel port, audio, IDE, SATA, USB, you name it). It's a fun environment to work in and you'll learn a lot about PC hardware, even if you (so far) thought you knew everything there is to know.

Feel free to join us on the mailing list or on IRC in #coreboot on Freenode.

I've been using CRM114 as spam filter for a while now, and I'm quite happy with it. Due to bug #529720 though (incompatible upstream file format changes) I decided to start my setup from scratch with a recent CRM114 version from unstable. Here's a short HOWTO, hope it's useful for others.

First you need to install crm114 and set up a few files in your $HOME directory.

  $ sudo apt-get install crm114
  $ mkdir ~/.crm114
  $ cd ~/.crm114
  $ cp /usr/share/doc/crm114/examples/mailfilter.cf.gz .
  $ gunzip mailfilter.cf.gz
  $ cp /usr/share/crm114/mailtrainer.crm .
  $ touch rewrites.mfp priolist.mfp

Edit ~/.crm114/mailfilter.cf and set the following variables (some are optional, but that's what I currently use):

  :spw: /mypassword/
  :add_verbose_stats: /no/
  :add_extra_stuff: /no/
  :rewrites_enabled: /no/
  :spam_flag_subject_string: //
  :unsure_flag_subject_string: //
  :log_to_allmail.txt: /no/

The :log_to_allmail.txt: /no/ option should probably stay at "yes" for the first few days until you have tested your setup and everything works OK. The ~/.crm114/allmail.txt file will contain all your mails, in case something goes wrong.

Now set up empty spam and nonspam files like this:

  $ cssutil -b -r spam.css
  $ cssutil -b -r nonspam.css

Test the setup by invoking mailreaver.crm as follows, typing some test text and then pressing CTRL+d:

  $ /usr/share/crm114/mailreaver.crm -u ~/.crm114
  test
  [CTRL-d]
  ** ACCEPT: CRM114 PASS osb unique microgroom Matcher **
  CLASSIFY fails; success probability: 0.5000  pR: 0.0000
  Best match to file #0 (nonspam.css) prob: 0.5000  pR: 0.0000
  Total features in input file: 8
  #0 (nonspam.css): features: 1, hits: 0, prob: 5.00e-01, pR:   0.00
  #1 (spam.css): features: 1, hits: 0, prob: 5.00e-01, pR:   0.00
  X-CRM114-Version: 200904023-BlameSteveJobs ( TRE 0.7.6 (BSD) ) MF-35EB8B9A [pR: 0.0000]
  X-CRM114-CacheID: sfid-20090920_151224_574131_D290E589
  X-CRM114-Status: UNSURE (0.0000) This message is 'unsure'; please train it!

The output should look similar to the above. If there are errors instead, you should check your settings in ~/.crm114/mailfilter.cf.

Now you have to setup a procmail rule for crm114:

  :0fw: crm114.lock
  | /usr/share/crm114/mailreaver.crm -u /home/uwe/.crm114

  :0:
  * ^X-CRM114-Status: SPAM.*
  IN.spam-crm114

In my case this rule is also followed by a spamassassin rule, so all my mail goes through two different spam filters (will look into dspam and bogofilter also I guess, the more the better).

Finally, in .muttrc I have the following configs so I can press SHIFT+x to mark a mail as spam, and SHIFT+h to mark it as non-spam (ham).

macro index X '| formail -I X-CRM114-Status -I X-CRM114-Action -I X-CRM114-Version | /usr/share/crm114/mailreaver.crm -u /home/uwe/.crm114/ --spam'
macro index H '| formail -I X-CRM114-Status -I X-CRM114-Action -I X-CRM114-Version | /usr/share/crm114/mailreaver.crm -u /home/uwe/.crm114/ --good'
macro pager X '| formail -I X-CRM114-Status -I X-CRM114-Action -I X-CRM114-Version | /usr/share/crm114/mailreaver.crm -u /home/uwe/.crm114/ --spam'
macro pager H '| formail -I X-CRM114-Status -I X-CRM114-Action -I X-CRM114-Version | /usr/share/crm114/mailreaver.crm -u /home/uwe/.crm114/ --good'

Important: crm114 is most effective if you start with empty CSS files (as shown above) and only train it by marking mails as spam/ham when it gets them wrong. The process will take a few hours or maybe a day (depending on how many mails per day you get), then the misclassification rate gets very low...

Update 2009-09-23: Changed --spam/--nonspam to the correct options for mailreaver/mailtrainer, --spam/--good.

paniq has released a new CC-licensed album named "From zero to hero". Quoting from the site:

This album supports the Piratenpartei Deutschland, which takes part in the general elections for the first time, and stands for freedom of information and open governance. Klarmachen zum Ändern!

There is no advertising budget. If you happen to like this album, please take the time to recommend it to your friends and colleagues.

Song: paniq - 8-Bit Pioneers (2:20 min, 4.3 MB)
License: CC-by-sa 3.0
Source: archive.org
Purchase from: ?

If you ever wanted to support an open-source project but you are not a programmer, here's one (of many possible) ways to help:

The Miro project (Internet TV / Video and Audio Podcast application for Linux, Windows, and Mac OS X) is seeking for pledges/donations that will be used to add subtitles support in Miro.

To quote from the announcement:

We’re hoping to build real subtitle support into Miro in the next couple months, but we need your help! So we’ve started a Kickstarter project to raise $1,000 to develop this feature for Miro on all three platforms: Windows, Mac, and Linux. Can you pledge to help make it happen? One of the great things about the Kickstarter model is that unless we can reach $1,000, your pledge won’t be charged.
[...]
(if you live in the United States, donations are tax deductible — we are a 501c3 non-profit)

There are 11 days left to make a pledge.

Minimalist techno / electronica from the deepx014 release from "Leipzig"...

Song: Leipzig - Fashion Passion (6:09 min, 15 MB)
License: CC-by 3.0
Source: archive.org
Purchase from: ?